PRODUCT Detail

Product Detail

FIXTURE

-Submerged Type implant with an Internal hex & 11’ Morse Taper connection structure
-Limited insertion torque : 40Ncm

COVER SCREW [Mini/Regular]

Packing unit : Cover screw

-Use 1.2Hex Drivers
-Tightening torque : 5-8 Ncm

HEALING ABUTMENT [Mini/ Regular]

Packing unit : Healing Abutment

-Use 1.2 Hex Drivers
-Tightening torque : 5-8 Ncm

IMPRESSION COPING [Mini/ Regular]

Packing unit : Cover screw

-Use 1.2Hex Drivers
-Tightening torque : 5-8 Ncm

ANALOG [Mini/ Regular]

Packing unit : Lab analog

-Oral fixtures are built on the working model

ABUTMENT

Cement Abutment
Two Piece Abutment [Mini/ Regular]

Packing unit : Abutment + Abutment Screw

-Use for making general cement-type prosthesis
-Tapered body design facilitating prosthetic fit
-Cross-Section design for the prevention of prosthesis rotation
-Use a 1.2 Hex Driver
-Tightening torque : 30Ncm

Rigid Abutment
One Piece [Mini/ Regular]

Packing unit : Abutment+Abutment Screw

-Use 1.2Hex Drivers
-Tightening Torque : NP 20Ncm, RP 30Ncm

Angled Abutment
Two Piece Abutment [Mini/ Regular]

Packing unit : Abutment + Abutment screw

-Use for the path adjustment of prosthesis
-Even/Odd two type hex connection overcoming the limitation of the abutment
-Use a 1.2Hex Driver
-Tightening torque : NP 20Ncm, RP 30Ncm

UCLA Abutment
[Mini/ Regular]

Packing unit : Abutment + Plastic + Abutment screw

-Use for cases with path and aesthetic and spatial constraints
-After customization, be sure to use dental alloy for casting to make the prosthesis
Abutment ( CO-CR-MO Alloy) melting point 1,380℃ to 1,420℃
-Use a 1.2 Hex Driver
-Tightening torque : NP 20 Ncm, RP 30 Ncm

SURGICAL KIT

ZENOIS SURGICAL KIT

INSTRUMENT

Lance Drill

-Used for first drilling and cutting the bone slightly by 2~3mm
-Deciding the bone density by drilling
-Hand piece speed : 1,000~1,500RPM

Step Drill

-Used for previous drilling more deeply and cortical flaring
-Laser marking, regulating the length(except for 2.0/3.0)
-Drilling may be optional, depending on the bone density
-Hand Piece speed : 1,000~1,500RPM

Lindemann Drill

-Used for side cutting when previous direction will be corrected
-The larger the diameter of drill, the smaller RPM
-Hand Piece speed : 1,000~1,500RPM

Final Drill

-식립전 마지막 식립구 확장 드릴로서, 최종 선택된 임플란트 직경보다
thread 높이인 0.5mm 정도 가늘다.

Torque Ratchet

-Connecting ratchet adaptor
-Laser marking(15,25,35Ncm)
-Controlling the insertion force

Tissue Punch

-Choose the right size
-Used to remove gum tissue for alveolar bone inspection

Parallel Pin

-Checking for the first drilling direction and position
-Inserting into the 2.0 hole

Drill Extension

-Extending the length of surgical drills

Abutment Driver

-Using in connecting abutment screw and Torque ratchet
-Torque control : 20Ncm(mini type), 30Ncm(standard type)

Tap Drill

-골질이 단단할 경우 Final Drill 형성후 사용하는 드릴이며, 최종 식립구가 보다
넓어지게 되며, 임플란트 식립이 보다 용이해진다.

Fixture Driver

-Handpiece(Machine) & Ratchet type(torque screw driver)
-Long & Short type
-Fixture driver for handpiece used for taking out the fixture from fixture storage ample, in the beginning of implanting
-Torque control : 40Ncm

ORTHODONTIC SCREW

New idea for Mini Implant in Orthodontic Treatment

Features

It doesn’t depend on the operator’s skill or the bony tissue of the patient, which is unlike other mini-implants system.

Triangular screw design（①） with sharp end and cutting edge acts to help self-tapping and screwing into bone smoothly.
Round screw + triangular screw（②） which work for screw planted in its place.
The screw shape of S-Thread（③） helps get more firmly closed to the bone and it can get strong fixing force with wedging effect initial loading. Since the screws has 0.4mm space between each others, it can prevent the cortex bone absorption due to the additional infection of bacteria or germs.